KOMAS LEGNO WOOD FILLER
Made of polyester unsaturated resins dissolve into monomer styrol and pigments of selected wood fibres. Benzol, toluol and xilol free. The polyester resins are termo setting and have as peculiar feature the property to set for catalytic reaction by aminic accelerators and organic peroxides.
- The surface of the support should be ROUGHED WITH GRINDER AND GREASE FREE.
- Do not apply on thermostatic support, antirust and antirust primer.
- Do not accelerate drying time by using heaters or infrared radiation.
- Do not add rest of dry filler back to the original can, which should be kept and well closed.
- MIXER LEGNO, at 20°C and with and H.R. of 40-50 can last at least 12 months.
Product Description
| Colour | Light, Walnut, Dark, Oak |
|---|---|
| Type | Paste |
| Packaging | 1 Kg |
| Carton (Pcs.) | 6 Pcs. |
Specifications
| Attribute | Details |
|---|---|
| Type of product | Spatula polyester filler |
| Colour | Light, Walnut, Dark, Oak |
| Specific weight | 1,200 kg / lt. |
| Mixture | 100 part KOMAS LEGNO WOOD FILLER with 1–3% hardener |
| Hardener ratio mixing | at 25 °C = 1%; at 18 °C = 2%; at 10°–15°C = 3% |
| Application time | From 4 to 7 minutes depending on room temperature and amount of hardener |
| Thickness | From 200 microns up to 2 mm |
| Dry sanding | After 15–30 minutes with resinate open paper frit 40–50–60–80; after one hour with sandpaper grit 80–120 and wet with latex waterproof paper grit 180–220 |
Explore Other Products: KOMAS EPOXY NX 2000 & NX 2050